半导体激光器辐照损伤效应实验研究进展

半导体激光器(LD)工作在空间辐射或核辐射环境中时,会受到辐照损伤的影响而导致器件性能退化。文章回顾了不同时期研制的LD(从早期的GaAs LD到量子阱LD和量子点LD)在辐照效应实验方面的研究进展,梳理了国际上开展不同辐射粒子或射线(质子、中子、电子、伽马射线)诱发LD辐射敏感参数退化的实验规律,分析总结了当前LD辐照效应实验方法研究中亟待解决的关键技术问题,为今后深入开展LD的辐照效应实验方法、退化规律、损伤机理及抗辐射加固技术研究提供理论指导和实验技术支持。     

瞬变电磁井间勘探的全空间几何因子

井间是剩余油的主要分布区域,为探测井间剩余油,提高采收率,提出了基于全空间几何因子的瞬变电磁井间勘探方法。在本井使用线圈发射、邻井使用线圈接收,根据瞬变电磁场理论,在阶跃信号的激励下发射线圈在地层中激发出沿圆周方向的闭合瞬变电场,该电场在导电地层中产生与地层电导率呈正比的涡流。由Doll地层环模型可知,地层中的涡流在空间任意点激发得到与地层电导率成正比的二次场响应信号(有用信号),并可表示为空间各点电导率的加权平均值,其权重即为井间瞬变电磁勘探的全空间几何因子;全空间几何因子集中分布在发射线圈和接收线圈附近,其它区域分布较少,在发射线圈和接收线圈两侧呈现不同的极性;对瞬变电磁响应与地层电导率、井间距和源距的变化规律研究可知,瞬变电磁井间勘探有用信号随着地层电导率的增大而增大,随着井间距的增加单调减小,在发射线圈和接收线圈处于同一深度时该响应信号幅度最大。     

Study of equivalent efficiency calibration method for radioactive gas source measured on HPGe detectors

ABSTRACT

In view of the complexity of current detection efficiency calibration of radioactive gas sources, a method using solid planar sources to be equivalent to gas sources was studied. For the 50 mL gas source box, an optimal equivalent scheme was selected by Monte Carlo Simulations. Then, the full-energy-peak efficiency curve of gas sources at the measurement position of 25 cm, with source-to-detector distance of 25 cm, was fitted by measuring solid planar sources with known activity. To verify the accuracy of the efficiency curve, ⁴¹Ar, ¹³³Xe and ⁸⁷Kr gases were produced and determined by length-compensated method. Then, their full-energy-peak efficiencies at 25 cm position away from the detector were directly calibrated. The percentage efficiency deviations between interpolation from the efficiency curve and direct calibration are all less than 2.5%, which proves the accuracy of the equivalent method. This calibration method is a general one and can be also used for some other radioactive sample measurements, such as non-destructive analysis of gaseous fission product samples with a suitable source-to-detector distance.     

Water leakage due to the welding defect and improvement to reach 1-MW beam operation in the mercury target of J-PARC

ABSTRACT

Neutron flux per pulse reached world record at neutron source in Japan Proton Accelerator Research Complex (J-PARC). In the J-PARC, mercury target system is used as a spallation neutron source. A target vessel has a multi-walled protection system that comprises a mercury vessel enclosed with a double-walled water shroud. This is to prevent the leakage of the mercury outside the target vessel. The multi-walled structure needed to be complicated with a lot of welding lines. However, during the operation, we faced an unscheduled shutdown due to water leakage to the intermediate layer between the mercury vessel and water shroud. An investigation on the cause of the leakage was carried out. It is deduced that the leakage path was formed due to the crack propagation from welding defects that are caused by the complicated multi-walled structure. The crack propagation is attributed to the repeated stress by pressure waves generated in the mercury target. Based on the investigation results, the design was improved to remove the welding line on the complicated structure and to realize the stable operation with 1 MW proton beam, which is the final design value of the neutron source in J-PARC.     

浅谈不同给液方式在铜电解车间的应用

不同给液方式对铜电解过程中有重要的影响,不同的循环方式会影响槽内温度分布、电解液成分及阳极泥沉降等,因此,根据铜电解生产不同情况的需要,分析对比了多种给液方式在贵冶电解车间的应用,总结了这几种给液方式的优缺点和适用条件。     

COB LED自动在线点胶测试补粉机的研制

在COB(Chip On Board)LED光组件制造领域,点胶、测试和补粉关键工艺基本以手工或半自动为主。为了保证COB LED产品质量一致性、提高生产效率,研制了一种COB自动在线点胶测试及补粉一体机,实现点胶、测试、补粉生产工序的自动化生产。阐述了其工艺流程及设计总体方案,提出了荧光粉量修补方法,修正初次点胶量,实现动态调节,减少人工干预。经实验验证,该一体机可以提高点胶工艺的自动化程度,具有运行速度快、可靠性好、性能稳定等特点。     

Application of differential evolution for cascaded multilevel VSI with harmonics elimination PWM switching

Harmonic elimination pulse width modulation (HEPWM) method has been widely applied to multilevel voltage source inverter (MVSI) to remove low frequency harmonics from its output voltage. However, the computation of the HEPWM switching angles for MVSI is very challenging due to several constraints, namely angle sequencing, very tight angular spacing and the numerous possibilities of angles distribution ratio. Realizing the potential of Differential Evolution (DE) to handle complex problems, this work proposes its application to solve the HEPWM problem for cascaded MVSI. Its emphasis is on improving the availability of HEPWM for higher output voltage by extending the maximum range of modulation index (M). It also removes the discontinuities in the switching angles and reduces the number of distribution ratio required to obtain the required solution. Compared to the most advanced (similar) work, i.e., 7-level MVSI with seventeen switching angles, DE covers a wider range of M; the maximum achievable M is 2.80. Furthermore, it exhibits very low second order distortion factor (DF₂): for the worst case, the value of DF₂ is 0.0014%. To verify the viability of the proposed algorithm, simulation is carried out and hardware prototype is constructed. Both results show very good agreement with the theoretical prediction.     

Reduction of Ripple Current Loss by Electromagnetic Coupling of Air‐Core Reactors

To reduce the loss due to ripple current in a multiphase current‐reversible chopper, we investigated electromagnetic coupling of an air‐core reactor. We derived the relationship between the amplitude of the ripple current, the duty factor, and the electromagnetic coupling coefficient, and used the results to estimate the effects of electromagnetic coupling in the design of a train energy storage system. We built reactors with electromagnetic coupling coefficients of 0.93 and 0.60. These reactors employed a new winding structure that provides an optimal electromagnetic coupling coefficient. The mass of the former type of reactor was increased by 4.4% over the conventional design, and that of the latter type of reactor was decreased by 17%. Finally, we tested the new reactors. When the chopper employs the former type of reactor and operates with equal‐phase switching and cumulative coupling, the loss due to ripple current is decreased by 11%. When the chopper employs the latter type of reactor and operates with shift‐phase switching and differential coupling, the loss is decreased to 31%. The test showed that the calculated relationships agreed with the measured values.